McLeod Original Street Twin clutch instructions can be found when you click this link: https://www.dropbox.com/s/xjz94o1si31vsis/I0001%20Street%20Twin%20Instructions.pdf?dl=0

1/4” = 15 FT. LBS
5/16” = 25 FT. LBS
3/8” = 35 FT. LBS
7/16” = 65 FT. LBS
½” = 70 FT. LBS
8MM = 25 FT. LBS
10MM = 45 FT. LBS
10MM Crank Bolt = 65 FT. LBS
11MM Crank Bolt = 65 FT. LBS

All McLeod street performance clutches require a Break-In Period of 500-750 miles of street, stop and go type of driving prior to driving at wide open throttle. This mileage is required to properly seat the disc with the pressure plate and the flywheel. The mileage listed will provide about 1200 apply and release cycles to the clutch assembly.
 
DO NOT run the vehicle on a chassis dyno prior to full Break-In procedure.

Important: During performance driving and break-in, all traction control devices must be turned off or clutch slippage will occur!

https://www.dropbox.com/s/rjkdffonqzqa7ha/I00126%20Break%20In%20Procedure.pdf?dl=0